|
Forum
|
|
Topic
|
|
KT7 / KT7-RAID / KT7A / KT7A-RAID / KT7E
|
|
Problems with RAID 0 Setup - Help please by KennyN (post # 9)
I had the same problem.Are you sure you enabled Raid in your motherboard settings? Kenny
|
|
TH7-RAID / TH7-II RAID
|
|
TH7 P 1.7 at 2230 plus! by Spanky (post # 1)
Thanks to the Rickwell and Mr. N vcore mod have been able to get past the 120-122 FSB (1.85 vcore) limit.Got to 125 FSB (2230+) and XP does just fine.I suspect with proper PCI/AGP dividers and better cooling, can go past 125!Heres to Rickwell ...
|
|
TH7-RAID / TH7-II RAID
|
|
Bios hack for single FSB increments by Spanky (post # 1)
Anyone know if there is a way to hack the bios to obtain single FSB increments for the TH7-RAID? or of a XP program that can adjust the FSB by 1 increments from within XP?Got that vcore mod done and feeling itchy...S ...
|
|
KR7A / KR7A-RAID
|
|
KR7A-RAID Lost AGP Video by garrel (post # 1)
Hello. I need help with my KR7A-RAID system. I initially set this system up with an AMD XP 1800+, Gainward TI550 Geforce3 AGP video card and Windows XP. After successfully installing the operating system and updating the drivers, things ...
|
|
KT7 / KT7-RAID / KT7A / KT7A-RAID / KT7E
|
|
SB live & Hollywood Plus by Jeremy Wills (post # 9)
I ended up getting a sound blaster dvd encore kit to go with my sound blaster live platinum card since the hollywood magic dvd which uses a sigma designs chipset sucks when mated with many via motherboard chipsets, i tried everything i came ...
|
|
TH7-RAID / TH7-II RAID
|
|
I think I finally got it right. by Spanky (post # 8)
Using a P 1.7. Did that vcore MOD and can to to 125 FSB in XP just fine at 1.95-2.0, though opengl (G3) games will cause a freeze there, and I am too timid to push the vcore above 2.0. Will run all day long in XP at 125 FSB. (Stock Th7-RAID board tops ...
|
|
TH7-RAID / TH7-II RAID
|
|
Insert is the key to Fixed AGP/PCI Problem by M4Carbine (post # 25)
nice to see someone actually knows about dark side of the moon lars The gf2 ultra died because of my own stupidity. I got ASII on the legs of the ram and when i powered it up i must have shorted em out as its now a gf2 ultra with 32mb ram. ( I tried ...
|
|
KT7 / KT7-RAID / KT7A / KT7A-RAID / KT7E
|
|
Will a AMD T-bird 1.3 run on the Kt7-Raid by Jeremy Wills (post # 1)
I currently run a T-Bird 800 on a Kt7-Raid which I know the CPU is a 200Mhz FSB only ship but is the Kt7-Raid a 200 or 266 board? I have a acquired a T-bird 1.3. The actual info off the chip is (on the center of the chip)AMD Athlon tm A1333AMSC3 AYHJA ...
|
|
TH7-RAID / TH7-II RAID
|
|
Windows FSB adjustmet for TH7 boards by Spanky (post # 1)
Anyone know if there is a FSB adjustment tool for windows XP, for FSB adjustment within XP, by 1 increments?TksS
|
|
TH7-RAID / TH7-II RAID
|
|
Which BIOS for me ? by Spanky (post # 2)
Grasshopper:You likely have the wrong HTP drivers installed, or perhaps the InNtel APP Accel program installed, which sometimes also degrade performance for some.My speeds (TH7-RAID) with wrong drivers range from 19K to mid-high ...
|
|
TH7-RAID / TH7-II RAID
|
|
Mr. Natural -50K ohm pot-VCOR MOD by Spanky (post # 6)
Rickwell:Ahhhhhhhhhhhhhhhh... fixed my opengl above 2K! Thanks.Can boot wo XP at 125 FSB = 2230+ (from 118-120 w/vcore at 1.85). Now vcore at 1.95-1.98. Opengl will not run stable at 125 FSB, and I am not brave enough to bump vcore above ...
|
|
KT7 / KT7-RAID / KT7A / KT7A-RAID / KT7E
|
|
Strange Problem, no fix anywhere yet.... by Mav18 (post # 4)
Thx, well I have tried not using any USB devices, but I have not tried disabling the usb controller, I will give that a try...About the kicking me out of games.. it completely closes the game, when I do a ctr+alt+del it does not show anything ...
|
|
KR7A / KR7A-RAID
|
|
KR7 Hang! by Eddy (post # 1)
hi guyz. there's a random problem with the bios.my system keep on hanging when i press DEL to get into bios setting. A blue line appear at the bottom of the screen when i press DEL key.And sometimes, when i manage to get into the bios setup. The ...
|
|
TH7-RAID / TH7-II RAID
|
|
HPT 2.0.0919 BIOS Question by GrassHopper (post # 1)
The 4W Bios from Abit uses the same HPT 1.11.0402 Bios.Is it possible and safe to install HPT 2.0.0919 Bios after flashing to the 4W Bios ?I understand there is a modded Bios available with an embedded HPT Bios later than the 1.11.0402.The ...
|
|
TH7-RAID / TH7-II RAID
|
|
Memory Issues Still ;-( by trevanian (post # 3)
I have stability problems with ONLY slot 1 and 2 filled. Have to fill 3 and 4 or all four of them for stability. No matter what brand.
|
|
KG7 / KG7-RAID / KG7-Lite
|
|
kg7 raid intermittent lockup [long] by Keyson (post # 6)
I had the same issue. I belive it is the RAM or the power supply but more likely the RAM. I had a 400w AMD compatible im my system it was doing the same thing. The 400w AMD compatible power supply lost a capacitor and can not get power to main 4 pin ...
|
|
VH6 / VH6-II / VH6T / VT6X4 / VP6
|
|
VCore on VH6-II by DerGolem (post # 1)
Is it possible on this mobo to flash the bios again when it has above normal voltage for CPU? I mean that will the bios set the default voltage to the above normal voltage e.g before flash voltage is 2.05 (user define) and after flash it is 2.05 ...
|
|
TH7-RAID / TH7-II RAID
|
|
Another NEW Bios by mulledp (post # 9)
the drives is the same model and size
|
|
BE6 Series
|
|
Dead BE6 II needs CPR by slow (post # 15)
i bought this board so long ago.. well, im sure so did everyone else. man, back then this abit BE 6 board sure looks promising.. i paid like $150 for this board at a computer show at 3 yrs ago. god, was i fooled! i guess what u paid isnt always what u ...
|
|
KT7 / KT7-RAID / KT7A / KT7A-RAID / KT7E
|
|
Recomendations on KT7a/XP1800 combo by jeff c (post # 2)
what i did,(very important,use a peice of elec. tape to cover the metal bridges on the back of the cpu.the thermal sensor will short out the chip)got a better heatsink,the sk6 .update bios to 64.,removed old chip dropped in new and ...
|
