BIOS File |
Description
|
beh70.exe |
- Support Intel PIII / Celeron CPUs up to1.1G(100). (Please mention:
This board does not support Tualatin core PIII / Celeron processors.)
- HPT 366 BIOS version: 1.25.
- BIOS compile date: 12/03/2001.
|
behxu.exe |
- Support Celeron 800MHz(100) CPU.
- Support Flash Menu.
- BIOS compile date: 02/08/2001
|
behuh.exe |
- Released Date: 09/05/2000
- Supports to PIII 1GHz CPU(133MHz FSB).
|
behsh.exe |
- Released Date: 07/03/2000
- Supports Celeron 566(66),600(66),667(66),700(66)and PIII850(100),866(133)
and 933(133) MHz CPUs..
|
behrv.exe |
- Released Date: 05/08/2000
- Improves the 133 Mhz option in SoftMenu.
- Fixes the hard disk detection failure issue when putting the
CD ROM drive on IDE 1, and sets the boot sequence as CDROM first.
- Fixes the incorrect memory capacity issue under Linux.
- Fixes the HighPoint display problem with AHA-2940A and TNT AGP
cards.
- Fixes the Wake on Ring, Wake on Lan, and Wake on Alarm problems
under Win98SE
- Increases the CPU Warning Temperture funtion to solve Win98SE
ShoutDown Problems when OEM CPU temperture is detected as too
high.
|
behqj.exe |
- Released Date: 02/01/2000
- For users who try to overclock the FSB up to 133 Mhz, but fail
when using some AGP video cards which can't run at that frequency
in 2X mode.
- Supports PIII CPUs up to 800MHz.
- Increases SDRAM compatibility.
|
behpo.exe |
- Released Date: 12/30/1999
- Supports I2C debug card.
- Adds an AGP transfer mode for choosing AGP transfer mode.
|
behnz.exe |
- Released Date: 11/17/1999
- Supports PIII 600Mhz(100Mhz FSB), 650Mhz(100Mhz FSB) and 700Mhz(100Mhz
FSB) CPUs.
- Updates HPT 366's BIOS to rev. 1.21.
- Shows the correct frequency as set by User Define.
|
behny.exe |
- Released Date: 10/23/1999
- Solves the boot failure issue when switching the CPU to another
one.
- Solves the auto detection function while putting a CDROM on
IDE 1 master.
|
be6np.exe |
- Released Date: 10/15/1999
- First release.
|