Top Page
	FAQs
		Q&A Collections

My system cannot power on successfully without recycling the power cord. Why? (KT7/KT7-RAID)

If you meet the following booting up problems, clear cmos data may help. <Symptoms> Cannot power on the system. Recycling the power cord can power on successfully once. But you still have to recycle the power cord again the next time. Do some bios setting, after save and exit setup screen the system doesn't reboot. You need to recycle the power cord to boot up. <Cause> There happens to be some garbage data left in cmos. Maybe owing to update bios version, overclocking or whatever. <Resolution> Power off the system Clear cmos data by jumper. Move the jumper from default 1-2 to 2-3 for several seconds then back to 1-2 again. Power on the system and hit <Del> to enter bios setup screen. Set correct CPU speed in softmenu3 and do other settings. Save and exit bios setup screen.