Top Page
	FAQs
		Q&A Collections

Why my KT7 board shutdown in several seconds just after power on?

KT7 WW BIOS adds CPU protecting function. If the CPU fan reading of fan header #1 lower than 2000 rpm, or the fan is connected on header #2 / #3 / #4 or directly to power supply unit, this BIOS will automatically SHUTDOWN THE POWER IN 10 SECONDS. This design protect the processor from damage by heat. If you are not sure the current CPU fan is correctly on fan header #1, DON'T UPDATE TO WW PLEASE! The header #1 is closer to memory sockets while header #2 is closer to CPU socket. Wrongfully update to WW may cause system never boot up again unless you connect a suitable CPU fan on header #1. The new BIOS after WW will set this function is Disabled.