Top Page
	FAQs
		Q&A Collections

Why HotRod 100 Pro shows me UDMA 2 (ATA 33) even I have ATA 66 harddisks?

Some harddisks are set to ATA33 in default by manufactors. Please connect harddisks on IDE1/2 of motherboard, and use harddisk utility from harddisk vendors to enable ATA66/100 function. Please be sure the cable is an 80-pin conductor. The BLUE connector must be plugged into the HotRod 100 Pro or your system will not work. BLACK connector is for Master device and GRAY connector is for Slave.