|
You may try the following methods step by step to recover your
BOIS if you have a duplicate board:
- Power on another computer with the exact same mainboard as
the dead one.
- Boot from A: in pure DOS mode without any resident programs.
- Take off the EEPROM carefully from the good mainboard when
it boot up completely under pure MS DOS mode.
- Put your destroyed BIOS on the exact same mainboard.
- Run awdflash.exe to reprogram the BIOS as normal process.
Ex, A:\awdfalsh *.bin /py /sn /cc /cd /cp(Enter)
BTW, you have to pay attention to the direction of the EEPROM
chip, when you put the BIOS chip onto BIOS socket. If the direction
is reversed, the BIOS chip will burn down. If you are not familiar
with these procedures, do not know how to do it, or don't have
an exact same board. Please just contact your supplier or our
branch office near you for help.
|
