Merry Xmas and a Happy New Year :-)
Top Page FAQs Peripheral Cards Hot Rod 100 / Pro
Welcome to HotRod 100/Pro (HPT370) FAQs.
BIOS
Why does my system hang, if connected the ATA33 HDD (Brand: SEAGATE ST33221A/ IBMDTTA-307010/ Maxtor 90432D2) on HPT370 controller, and it can't transfer Data from IDE1 CD-ROM drive? How do I fix the problem?
BIOS update guide for RAID motherboards.
Drivers update guide for VIA / HPT motherboards
Why HotRod 100 Pro shows me UDMA 2 (ATA 33) even I have ATA 66 harddisks?
Could I use different size harddisks on HotRod 100 Pro?
Why I can not assign boot disk in "Select Boot Disk" session?
What type of FLASH ROM should I select while upgrading HotRod 100 Pro BIOS via LOAD.EXE?
How can I update the Highpoint BIOS?
Why I get a Blue-screen-of-death after loading Liveware 3.0 for Creative SBLive! sound card under Windows ME?
Why a single or RAID disk is wrongfully recognized when the size larger then 64GB?
How to install HPT366/370 driver in Windows NT 4.0?
Do you have a driver of HPT 366/ 370 controller for WinME?
Why does the BIOS detect the ATA 66/100 hard drive as an Ultra ATA/33 on the ATA 66/100 port rather than an Ultra ATA/66/100 even though you have put an ATA 66/100 hard drive into the ATA 66/100 port?
Why the system stop response for about one minute when detecting the hard drive on RAID channels?
What is RAID? Why would I ever use it?
What are RAID levels? Why so many? What distinguishes them?
How could I replace a new harddisk while one of the harddisks broken after building a raid 1 (Mirror disk array) system.
Disk size is wrong after building raid configuration.
How to build RAID 0+1 disk array?
Why all my data get lost after I create/delete RAID in hpt370 BIOS.
* Product names appearing in this site are for identification purpose only and trademarks and product names or brand names appearing in this site are property of their respective owners.
Powered by FAE Dept., ABIT Computer.